Hangar Doors Sliding
- Top-hangar system intended for use with top-fix and wallmount doors. The enclosed track design makes the system more secure since the wheels cannot bounce off the track. Bengaluru Enterprises is suitable for a wide range of door weights and applications. Ideal for heavy industrial uses such as sheds and factories.
- Hangar doors are highly recommended to install where there is no headroom and side clearances are permitted. They are either unidirectional or bi-parting with each door section top and bottom guided. If there is any pre-engineered facility, bottom rolling hangar doors make an ideal application because their heavy weight is carried out not by the building structure, but by a bottom rail. Designed to prevent indoors from all kinds of system and resist wind load, hangar doors are the most sought after in the market.
- Bottom rolling hangar doors, based on my experience, are ideally suited for extremely big applications, such as single-aisle passenger planes and larger. Because of shear weight, these hangars are frequently so tall that a lifted-type door is not a possibility (bottom rolling doors weigh many tonnes per unit, far beyond the ability of hydraulics actuators to lift). Bottom rolling doors require minimum maintenance, especially if they are unpowered, because there is nothing that can go wrong with these doors. Powered bottom rolling doors are the most basic of powered or aided systems, with a powerful electric motor powering the driving wheel by simple direct chain drive.
- Track sections are cold rolled from high grade galvanised or steel strip and are supplied in four sizes in standard lengths
- Support brackets, designed for side or top fixings and for single or double track runs
- Continuous runs of track are formed by butt-joining several lengths, using a track support bracket and welded bracket at each joint
- Door hangers are in various designs to suit door construction. Hangers have grease packed ball bearings and alloy wheels to ensure long life and smooth running
- Vertical adjustment is incorporated in the hanger body, avoiding the need to drill the door
- Wicket door for easy access may be incorporated into a sliding door
- Designed to accommodate for different industrial building designs, doors can slide to one or both sides
- At each end, a track stopper is placed to absorb any impact and to hold the door in the open or closed position
- Additional guides at the bottom prevent the door from oscillation
- Interlocking facility between two doors
- Doors can be constructed with vertical EPDM rubber seal to prevent dust and provide complete sealing
- The sliding door gear range is designed for continuous hard wearing use with sliding doors up to 3000Kgs
- A total safety system, automatic sliding doors are designed to meet all operational & safety needs
- Unlimited widths for manually operated ‘push along’ doors
- Quick release disengaging mechanism inside sliding doors enables changeover to manual operation in case of power failure
- These sliding doors can be locked in open or closed position
- Control to stop anytime while garage door is moving
- Single or multiple door leaf, sliding hangar doors are available in any required size
- Sliding hangar doors can sustain extreme weather conditions and can provide excellent insulation
- Sliding hangar doors provide the best alternative for large-scale door locations, requiring high-quality heat and noise insulation
- Their rigid frame construction makes automated sliding doors ideal for large-scale exterior door locations
- All gearbox and motor system are specially chosen for maximum efficiency. In addition, specially designed side drum and folding system provide extra safety and speed
| Mounting Location | |
| Technical Specification | Description |
| Product | Motorized Sliding Doors |
| Door Type | Single side / Bi-parting Type |
| Door Mounting | On Top Track Mechanism |
| Opening Direction | Horizontal |
| Mounting Location | Inside/Outside |
| Mounting Location | |
| Opening Direction | Horizontal |
| Mounting Location | Inside/Outside |
| Mounting Location | |
| Opening Direction | Horizontal |
| Mounting Location | Inside/Outside |
| Opening Direction | Horizontal |
- Hospitals
- Pharmaceuticals
- Aircraft
- Shipyards
- Food Industries
- Retail Malls
- Automobiles
- Logistics
- Chemical Industries
- Residential and Educational Places